ELECTRO-MECHANICAL CRIMP TOOL
Product Description
- Advanced Ergonomic Tool Design with "Safe Distance" Trigger Closing Control
- Pre-Clamp Function to Improve Cycle Time and Quality
- Crimp Cycle Time is 1.3 Seconds
- 250 Crimps per Charge (typical battery life)
- Li-Ion 10.8 Volt Battery and Charger
- Built-in LED Light
- Data Retrieval Available
- Tool kit consists of a molded case, one battery and charger. Spare battery charger P/N: HDE-MBC110. Spare battery P/N: HDE-MBP108.
- Dies are sold separately, see Available Dies in the table below. This tool can accommodate some die sets which are supplied by connector sources. Consult DMC for details.
- Consult DMC for custom engineered die sets and special applications and die sets and configurations.
Details
| DMC P/N: | EMC3300 |
| Name: | ELECTRO-MECHANICAL CRIMP TOOL |
| Weight: | 6.00 LBS |
| PDF's Available: |
EMC3300 Battery Powered Crimp Tool
| AVAILABLE DIES | |
| DMC Part Number | Application Notes |
|
EMC-101D |
White, Red, Blue and Yellow Insulated Spare Wire Caps |
| EMC-102D | Red, Blue, and Yellow Insulated Terminals |
| EMC-102DL | Same as EMC-102-D plus Locator |
| EMC-106D | Die Cavities: .042 sq., .128 hex, .178 hex |
| EMC-108D |
Die Cavities: .068 sq., .218 hex, .255 hex |
| EMC-117D | Die Cavities: .128 hex, .178 hex, .213 hex, .255 hex |
| EMC-129D | M81824/1-X splices (comparable to M22520/37-01) |
| EMC-1005D | Uninsulated Terminals 10-22 AWG (comparable to TE49935) |
| EMC-1006D | High Temp Uninsulated Terminals 10-22 AWG (comparable to TE46447) |
Additional Information
Additional Information
| DMC P/N | EMC3300 |
|---|---|
| MILITARY P/N | No |